Lifetime 8x10 ft Outdoor Storage Shed Kit (6405)
Why shouldn’t your outdoor shed be as stylish as your house? A Lifetime outdoor storage shed is a solution to your storage problems as well as a great backyard attraction. This shed comes with shelving units and peg strips so you can find what you need, when you need it. Keep your garden equipment organized and handy with this attractive Lifetime outdoor storage shed. The Lifetime 6405 shed is UV-protected from fading and cracking. The high-impact polyethylene floor is resistant to stains and solvents, so spills are easily cleaned up. Constructed from high-density polyethylene plastic with steel reinforcements, this Lifetime 6405 outdoor storage shed is built to weather the storms for many years. And you'll appreciate its low maintenance--No painting. No rusting! Made in the USA. Covered by a 10 yr. limited factory warranty in US and Canada. Compatible with our 8 ft expansion kits.
Approved for Dade Co., FL. NOA 09-0728.08 if reinforced with the Lifetime Extreme Weather Kit accessory.
Consult local building codes before assembly. This shed must be built on a flat level foundation of wood or concrete (not included). It is designed with a slight indentation in each corner of the floor so that you can drill through the flooring to secure it to the foundation. Anchoring hardware depends on the type of foundation you have and is therefore not included in the shed kit. Not including the installation of the foundation, you can expect assembly of the shed itself to take 2 adults up to 6 hours.
- *Minimum High-Velocity Wind Rating in Florida is 15 psf. When paired with the Lifetime Wind Kit, Lifetime Sheds meet a wind rating of 20 psf (~118 mph).
- Attractive Appearance and Design
- Customizable Shelving and Storage System
- Dade County Certification for Lifetime Sheds: https://bit.ly/2zwb010
- Dual-Wall High-Density Polyethylene (HDPE) Construction
- Heavy-Duty Steel Trusses Provide Additional Roof Strength
- High-Pitched Roof Allows for Quick Drainage of Rain and Snow
- Lifetime NOA Number: 17-0426.06
- Lockable Steel-Reinforced Doors for Added Security
- Low Maintenance Design
- Slip-Resistant High-Density Polyethylene (HDPE) Floor Protects Against Oil, Solvents, and Stains
- Sturdy Steel-Reinforced Construction
- UV Protected to Prevent Weather Damage
Features & Benefits:
UV-protected to help prevent fading and cracking. Stain-resistant exterior never needs painting.
High-Density Polyethylene (HDPE) Floor
Oil, stain and slip-resistant floor surface does not crack, chip, or peel.
Steep angle allows for quick drainage of rain and snow, and provides a spacious walk-around interior. Heavy-duty steel trusses increase strength.
Steel-reinforced doors provide an extra-large opening, sturdy structure, and exterior padlock loop.
Provide airflow and keep pests out.
Steel Reinforced, customizable, and adds additional storage space.
Designed with dual-wall high-density polyethylene (HDPE) panels with steel wall supports for added strength.
Nominal Dimensions: 8 ft. x 10 ft. (2,43 m x 3,04 m)
Cubic Feet: 491.3 ft3 (13,91 m3)
Square Feet: 71.3 ft2 (6,62 m2)
Door Handle: High-Impact Handles with Metal Latch
Door Hinges: Full-Length Galvanized Steel Hinge Pins
Door Locking: Exterior Padlock Loop with Two (2) Deadbolts on Interior of Left Door
Door Opening Dimensions: 58.3 in. W x 75.4 in. H (148 cm x 191,5 cm)
Door Structure: Steel-Reinforced Polyethylene
Eave Depth: 2 in. (5,08 cm)
Exterior Dimensions: 7 ft. 8 in. W x 9 ft. 8 in. D x 8 ft. H (2,336 x 2,946 x 2,438 cm)
Exterior Roof Dimensions: 8 ft. W x 10 ft. D (2,438 cm x 3,048 cm)
Fascia Height: 1.25 in. (3,1 cm)
Floor Structure: Slip-Resistant Dual-Wall Polyethylene
Footprint: 7 ft. 10 in. W x 9 ft. 10 in. D (2,38 m x 2,99 m)
Interior Dimensions: 7 ft. 6 in. W x 9 ft. 6 in. D x 5 ft. 10 in. - 7 ft. 10 in. H (2,286 x 2,895 x 1,178 - 2,387 cm)
Interior Headroom (truss to floor): 80 in. (2,032 m)
Materials of Construction: Powder-Coated Steel and High-Density Polyethylene
Peg Strips: Two (2) 16 in. Peg Strips with Metal Hooks
Roof Pitch: 6:12
Roof Structure: Dual-Wall Polyethylene Panels
Roof Support Trusses: Three (3) Steel A-Frame Trusses
Screened Vents: Two (2) Screened Vents
Shelves: Five (5) Shelves - Including Two (2) 9.5 in. radius Corner Shelves, Two (2) 30 in. W x 10 in. D Rear Shelves, and One (1) 90 in. W x 9 in. D Rear Shelf
Tool Corral Compatible: Yes
Wall Structure: Steel-Reinforced Dual-Wall Polyethylene Panels
Windows: One (1) 16.5 in. W x 16.5 in. H Polycarbonate Window – Opens Half-Way
Wind Rating: 65 mph (104.6 km)
Snow Load Capacity: 23 lbs (10.4 kg) psf
Packaged Dimensions : Box 1 is 95.31"L (242.087 cm) x 32"W (81.28 cm) x 11.78" (29.921 cm), 280.25 lbs (127.119 kg), Box 2 is 95.31"L x 31.75" (80.645 cm) x 11.78"H (29.921 cm), 197 lbs (89.358 kg)