Lifetime 15x8 ft Storage Shed Kit - Dual Entry (60079)
Looking for an outdoor shed that requires very low maintenance? This 15 x 8 foot Lifetime Storage Shed is constructed of high-density, steel-reinforced double-walled polyethylene plastic which is UV protected against fading. No painting required to look as good as new for many years. Doesn't split or warp like wooden sheds, or dent and rust like metal sheds. Simulated wood shingled roof and wood-grain textured wall panels make a Lifetime outdoor storage shed an attractive addition to your backyard. Designed with all the features that you appreciate in an outdoor shed, as well as lots of shelving and organizational accessories to keep the shed contents organized and easy to find. Made in the USA from US and imported parts. Covered by a 10 yr. limited factory warranty.
Consult local building codes before assembly. Requirements vary from county to county. This model is not compatible with the Lifetime Snow Load Kit or Extreme Weather Kit.
This shed must be built on a flat level foundation of wood or concrete (not included). Flooring must be anchored to the foundation. Anchoring hardware depends on the type of foundation you have and is therefore not included in the shed kit. Not including the installation of the foundation, you can expect assembly of the shed itself to take 2 adults up to 6 hours.
- Attractive Appearance and Design
- Customizable Shelving and Storage System
- Dual-Wall High-Density Polyethylene (HDPE) Construction
- Heavy-Duty Steel Trusses Provide Additional Roof Strength
- High-Pitched Roof Allows for Quick Drainage of Rain and Snow
- Lockable Steel-Reinforced Doors for Added Security
- Low Maintenance Design
- Slip-Resistant High-Density Polyethylene (HDPE) Floor Protects Against Oil, Solvents, and Stains
- Sturdy Steel-Reinforced Construction
- UV Protected to Prevent Weather Damage
Features & Benefits:
UV-protected to help prevent fading and cracking. Stain-resistant exterior never needs painting.
High-Density Polyethylene (HDPE) Floor
Oil, stain and slip-resistant floor surface does not crack, chip, or peel.
Steep angle allows for quick drainage of rain and snow, and provides a spacious walk-around interior. Heavy-duty steel trusses increase strength.
Steel-reinforced doors provide an extra-large opening, sturdy structure, and exterior padlock loop.
Provide airflow and keep pests out.
Steel Reinforced, customizable, and adds additional storage space.
Designed with dual-wall high-density polyethylene (HDPE) panels with steel wall supports for added strength.
Assembly: Secure-Fastened Assembly with High-Grade Metal Screws
Cubic Feet: 749 ft3 (21,20 m3)
Door Handle: High-Impact Handles with Metal Latch
Door Hinges: Full-Length Galvanized Steel Hinge Pins
Door Locking: Exterior Padlock Loop with Two (2) Deadbolts on Interior of Left Door
Door Opening Dimensions: 58.3 in. W x 75.4 in. H (148 cm x 191,5 cm)
Door Structure: Steel-Reinforced Polyethylene
Eave Depth: 2 in. (5,08 cm)
Exterior Dimensions: 14 ft. 7.5 in. W x 7 ft. 8.7 in. D x 8 ft. H (2,354 x 4,457 x 2,438 cm)
Exterior Roof Dimensions: 15 ft. W x 8 ft. D (4,572 cm x 2,438 cm)
Fascia Height: 1.25 in. (3,1 cm)
Floor Structure: Slip-Resistant Dual-Wall Polyethylene
Footprint: 14 ft. 10 in. W x 7 ft. 10 in. D (4,521 cm x 2,387 cm)
Interior Dimensions: 7 ft. 6 in. W x 14 ft. 6 in. D x 5 ft. 10 in. - 7 ft. 10 in. H (2,286 x 4,419 x 1,778 - 2,387 cm)
Interior Headroom (truss to floor): 80 in. (2,032 m)
Materials of Construction: Powder-Coated Steel and High-Density Polyethylene
Max Roof Load: 23 psf
Max Wind Resistance: 65 mph (104,6 kph)
Nominal Dimensions: 15 ft. x 8 ft. (4,57 m x 2,43 m)
Peg Strips: Two (2) 16 in. Peg Strips with Metal Hooks
Roof Pitch: 6:12
Roof Structure: Dual-Wall Polyethylene Panels
Roof Support Trusses: Five (5) Steel A-Frame Trusses
Screened Vents: Two (2) Screened Vents
Shelves: Four (4) Corner Shelves – 9 ½ in. radius – One (1) 90 in. W x 9 in. D Shelf
Square Feet: 108.7 ft2 (10,10 m2)
Tool Corral Compatible: Yes
Wall Structure: Steel-Reinforced Dual-Wall Polyethylene Panels
Windows: Two (2) 16.5 in. W x 16.5 in. H Polycarbonate Windows – Open Half-Way
Packaging Dimensions: Box 1 is 96"L x 32"W x 47.78"H and weighs 278 lbs, Box 2 is 95.31"L x 32"W x 16"L and weighs 220 lbs, Box 3 is 95.31"L x 32"W x 5"H and weighs 90 lbs